How to make a model of the Earth from plasticine?


Our planet Earth is an extraordinary miracle! As a rule, it begins to study in the third grade of primary school. And in order to facilitate the process of memorizing the structure of the Earth, teachers set very exciting creative tasks for their students - to make a model of our planet from a special mass, draw it on paper or make an engaging encyclopedia with their own hands

Our planet Earth is an extraordinary miracle! As a rule, it begins to study in the third grade of primary school. And in order to facilitate the process of memorizing the structure of the Earth, teachers set very exciting creative tasks for their students - to make a model of our planet from a special mass, draw it on paper or make an engaging encyclopedia with their own hands. In this article you will learn how to make a model of the Earth from plasticine with your own hands. You do not need special knowledge and tools, just be patient and connect your imagination.

Materials and tools

If you are thinking about how to make a model of the Earth out of clay and what skills are needed for this, then first pay attention to the availability of all the necessary materials and tools. You will need mass for children's creativity or special material for modeling. Currently produced a huge variety of masses. Some of them harden and become hard as a stone, while others feel like sand to the touch. For the modeling of the model of our planet will suit any mass, in the assortment of which there are all the necessary colors.

In addition, to make a model of the Earth out of clay, you will need tools. These are special stacks and knives. If you sculpt with small children, it is best to limit the non-sharp stacks. To add texture and to sculpt the mountains, you can come in handy with a variety of handy tools - from toothpicks with beads at the end to sticks and old toothbrushes.

The simplest model of our planet

To blind the most simple crafts, you will need plasticine of three colors - blue, green and white. First roll a small ball out of a blue or blue mass. Then take the green one and roll it into a thin flat cake no more than two millimeters thick. And then look at the geographical atlas. Try cutting continents and islands with a knife. Then stick the carved shapes on the blue ball. The model of the Earth from plasticine is almost ready! It remains only to blind white ice caps. If you wish, you can also mark the large mountains and rivers.

Model Earth from plasticine do it yourself. Making several layers

If you are thinking about how to mold the Earth model from a more complex and interesting model, then be patient! You will need a lot for modeling the following colors: blue, green, red, orange, yellow and black. Also prepare a sharp knife. You will need it when you cut the clay of Earth into two parts. First you need to roll a small ball of red mass. Then take a piece of orange clay, roll it into a cake and wrap a red ball with it. Do the same with yellow and black mass. The last layer will be of blue clay.

And now it's time to make the continents! Take a small piece of green mass for modeling and roll it into a thin layer one or two millimeters thick. Take the geographical atlas again and try to cut the continents and islands from the bed. Stick them to the blue ball. And now the fun part! Send the model of the Earth from plasticine in the refrigerator for half an hour. Or in the freezer for ten to fifteen minutes. This is necessary so that during the cutting your model of the Earth from plasticine is not smeared. Remove the craft from the fridge and carefully cut it with a sharp knife.

Done! Now you can complete the mountains and ice caps. If desired, you can modify the halves using a toothpick with a bead on the end or a simple awl.

Planet model of the planet

If you are thinking about how to make a model of the Earth out of plasticine flat, then prepare a sheet of cardboard. Draw on it the ground, and then just start to stick around the picture with plasticine of suitable colors. This picture can be hung on the wall or carried to school for the exhibition.

Rules for working with masses for modeling

Before making a model of the Earth from plasticine, be sure to wash your hands. In addition, you should carefully prepare your workplace. First, wipe the table. Secondly, in advance you need to buy a special plastic plate for working with clay and masses for modeling. So you do not stain the table. It is desirable that during the modeling you had a wet rag close at hand, as some colors of plasticine tend to get your hands dirty.

If you want to sculpt with a very small child, then buy a special mass for sculpting. As a rule, such products are designed for the fact that the child can taste it. In addition, the model can be molded of mastic - it will definitely be harmless to the child.

What else can you make a model of the Earth

If you have already learned how to sculpt from clay, then now you can start to create from polymer clay. This material is more expensive and requires baking. But on the other hand, the resulting model of the Earth will be solid and will never fade. In addition, you can pile the planet out of wool. Then it will be not only a cognitive toy, but also such an interior item.